ISIS Neutron and Muon Source Data Journal
This is a page describing data taken during an experiment at the ISIS Neutron and Muon Source. Information about the ISIS Neutron and Muon Source can be found at https://www.isis.stfc.ac.uk.
3D Printed Collimator Tests on Engine-X
Abstract: The objective of this Xpress proposal is to carry out in situ tests of collimation effectiveness for both 3D printed (PLA loaded with B4C) and hand-fabricated (sheet steel painted with boron) collimation assemblies resembling those intended for use in the radial collimator on HRPD-X.
Principal Investigator: Dr Dominic Fortes
Local Contact: Dr Tung Lik Lee
DOI: 10.5286/ISIS.E.RB2690070
ISIS Experiment Number: RB2690070
| Part DOI | Instrument | Public release date | Download Link |
|---|---|---|---|
| 10.5286/ISIS.E.RB2690070-1 | ENGINX | 06 May 2029 | Download |
Publisher: STFC ISIS Neutron and Muon Source
Data format: RAW/Nexus
Select the data format above to find
out more about it.
Data Citation
The recommended format for citing this dataset in a research
publication is as:
[author], [date], [title], [publisher],
[doi]
For Example:
Dr Dominic Fortes et al; (2026): 3D Printed Collimator Tests on Engine-X, STFC ISIS Neutron and Muon Source, https://doi.org/10.5286/ISIS.E.RB2690070
Data is released under the CC-BY-4.0 license.
