ISIS Neutron and Muon Source Data Journal

Distribution of stress near the hole-punched region before and after fatigue loading in advanced high-strength steels

Abstract: Advanced high-strength steels (AHSS) are increasingly used in the automotive industry due to their superior strength-to-weight ratio, enabling thinner structural components and improved fuel efficiency. However, forming processes such as hole punching can induce surface roughness, shear-affected zones, and high residual stress concentrations that significantly reduce fatigue performance. This proposal aims to investigate the localized residual stress distribution near the hole-punched interface in AHSS components and how this evolves during fatigue loading. In this work, we propose neutron diffraction mapping of residual strain in 350 × 100 × 8 mm³ steel plates with 15 mm diameter punched holes, focusing on two steels: AHSS (700MCPlus) and HSLA (500MC). Measurements will be conducted in the longitudinal, transverse, and normal directions over a 3 × 8 mm² area at the hole interface, using a 1 × 1 × 1 mm³ gauge volume for high spatial resolution. Samples in both the as-received and 1000-cycle fatigue-loaded states will be examined. These measurements will confirm simulation-predicted stress distributions, including high tensile and compressive regions, as well as help assess stress relaxation within this region after fatigue loading. The results from this proposal will serve as essential ground truth for refining fatigue life models, as well as supporting the development of AHSS grades optimized for fatigue performance in automotive applications.

Principal Investigator: Dr William Hearn
Experimenter: Mr Yicheng Liu
Experimenter: Dr Peter Hedström
Experimenter: Dr Seyed Mohammad Mehdi Hoseini Athar
Local Contact: Dr Tung Lik Lee

DOI: 10.5286/ISIS.E.RB2520499

ISIS Experiment Number: RB2520499

Publisher: STFC ISIS Neutron and Muon Source

Data format: RAW/Nexus
Select the data format above to find out more about it.

Data Citation

The recommended format for citing this dataset in a research publication is as:
[author], [date], [title], [publisher], [doi]

For Example:
Dr William Hearn et al; (2025): Distribution of stress near the hole-punched region before and after fatigue loading in advanced high-strength steels, STFC ISIS Neutron and Muon Source, https://doi.org/10.5286/ISIS.E.RB2520499

Data is released under the CC-BY-4.0 license.