ISIS Neutron and Muon Source Data Journal

Strain, stress and damage evolution in alloys during cyclic loading considering interplay of microstructure, surface hardening and overload

Abstract: Engineering components are frequently subjected to random cyclic loading and occasional stress overloads during service, significantly affecting fatigue behavior. The resulting stress and strain evolution is further complicated by interactions between surface hardening treatments and microstructure. To optimize fatigue performance and durability, especially in components such as automotive gears, a detailed understanding of these interactions is essential. This proposal aims to use neutron Bragg edge imaging (BEI) to investigate the evolution of localized strain and phase distributions in surface-hardened steels under cyclic loading, including overload effects. The study will focus on 20MnCr5 case-hardened steel specimens provided by Ovako and used by Scania, examined in the as-treated state, after 1000 and 2000 fatigue cycles, and after an overload followed by 1000 cycles. BEI will capture strain and phase changes, particularly retained austenite content, across the surface using a high-resolution Timepix 2 detector. A total of 18 measurements will be conducted, covering various surface treatments and loading histories. The resulting data will clarify how retained austenite transforms under loading and how it influences local stress concentrations and fatigue crack resistance. These insights will guide the design of microstructures and surface treatments for enhanced fatigue life and lightweighting of critical steel components.

Principal Investigator: Dr Seyed Mohammad Mehdi Hoseini Athar
Experimenter: Mr Yicheng Liu
Local Contact: Dr Winfried Kockelmann
Experimenter: Dr William Hearn
Experimenter: Dr Peter Hedström

DOI: 10.5286/ISIS.E.RB2520552

ISIS Experiment Number: RB2520552

Publisher: STFC ISIS Neutron and Muon Source

Data format: RAW/Nexus
Select the data format above to find out more about it.

Data Citation

The recommended format for citing this dataset in a research publication is as:
[author], [date], [title], [publisher], [doi]

For Example:
Dr Seyed Mohammad Mehdi Hoseini Athar et al; (2025): Strain, stress and damage evolution in alloys during cyclic loading considering interplay of microstructure, surface hardening and overload, STFC ISIS Neutron and Muon Source, https://doi.org/10.5286/ISIS.E.RB2520552

Data is released under the CC-BY-4.0 license.