ISIS Neutron and Muon Source Data Journal
This is a page describing data taken during an experiment at the ISIS Neutron and Muon Source. Information about the ISIS Neutron and Muon Source can be found at https://www.isis.stfc.ac.uk.
Effect of layer stacking and cooling conditions on residual stress distribution in wire arc additive manufactured duplex stainless steel
Abstract: This proposal aims to use neutron diffraction for the investigation of residual stresses in a duplex stainless steel induced by Wire Arc Additive Manufacturing (WAAM) process enhanced by a cooling system. The study will focus on an important issue such as: the control of microstructure, the reduction of residual stresses through cooling strategies and finally, the relationships between layers stacking, cooling conditions and residual stress distribution. Neutron diffraction will be used to analyze the residual stress gradients. The collected data will contribute to quantifying the impact of number of the deposed layers, the cooling conditions on the metallurgical and mechanical behaviors of the built parts. The stresses obtained in this work will also serve as essential data to validate a concurrently developed thermomechanical Finite Elements model of the produced parts. The ultimate goal is to enhance the understanding and the control of the WAAM process to improve the component?s production.
Principal Investigator: Mr Anas Rassane
Experimenter: Dr Bruno Courant
Experimenter: Miss Pauline Arnoulin
Experimenter: Dr Emmanuel Stephane Didier BERTRAND
Local Contact: Dr Joe Kelleher
Experimenter: Dr David Gloaguen
DOI: 10.5286/ISIS.E.RB2510107
ISIS Experiment Number: RB2510107
| Part DOI | Instrument | Public release date | Download Link |
|---|---|---|---|
| 10.5286/ISIS.E.RB2510107-1 | ENGINX | 15 May 2028 | Download |
| 10.5286/ISIS.E.RB2510107-2 | ENGINX | 17 May 2028 | Download |
Publisher: STFC ISIS Neutron and Muon Source
Data format: RAW/Nexus
Select the data format above to find
out more about it.
Data Citation
The recommended format for citing this dataset in a research
publication is as:
[author], [date], [title], [publisher],
[doi]
For Example:
Mr Anas Rassane et al; (2025): Effect of layer stacking and cooling conditions on residual stress distribution in wire arc additive manufactured duplex stainless steel , STFC ISIS Neutron and Muon Source, https://doi.org/10.5286/ISIS.E.RB2510107
Data is released under the CC-BY-4.0 license.
