This is a page describing data taken during an experiment at the ISIS Neutron and Muon Source. Information about the ISIS Neutron and Muon Source can be found at https://www.isis.stfc.ac.uk.
Neutron diffraction characterization of strain/stress field of 316L Stainless Steel « walls » made with Wire + Arc Additive Manufacturing te
Abstract: The studied 316L SS samples were obtained with successive deposition of molten metallic wire using electrical arc generated with a welding process : Gas Metal Arc Welding (GMAW). Such process is called Wire + Arc Additive Manufacturing.The main goal is to measure the residual strain field into the base plate (BP) and overlaid deposits (so the sample). Another objective is to observe the effect of a new deposit on the residual stress field induced by the previous one. These data will help validating the thermo-mechanical simulation and the material behavior law (PhD project of Camille CAMBON Oct.2017 to Sept. 2020). Secondly, we expect to observe a change in the residual stresses of the part when the operating conditions are modified (welding intensity, welding speed, cooling time ?) by characterizing two samples built with 2 sets of process parameters (with 5 deposits).
Principal Investigator: Dr sebastien rouquette
Experimenter: Dr issam bendaoud
Experimenter: Miss camille cambon
Local Contact: Dr Tung Lik Lee
Experimenter: Dr fabien soulie
DOI: 10.5286/ISIS.E.RB2010391
ISIS Experiment Number: RB2010391
Part DOI | Instrument | Public release date | Download Link |
---|---|---|---|
10.5286/ISIS.E.RB2010391-1 | ENGINX | 03 December 2023 | Download |
Publisher: STFC ISIS Neutron and Muon Source
Data format: RAW/Nexus
Select the data format above to find
out more about it.
Data Citation
The recommended format for citing this dataset in a research
publication is as:
[author], [date], [title], [publisher],
[doi]
For Example:
Dr sebastien rouquette et al; (2020): Neutron diffraction characterization of strain/stress field of 316L Stainless Steel « walls » made with Wire + Arc Additive Manufacturing te, STFC ISIS Neutron and Muon Source, https://doi.org/10.5286/ISIS.E.RB2010391
Data is released under the CC-BY-4.0 license.