ISIS Neutron and Muon Source Data Journal
This is a page describing data taken during an experiment at the ISIS Neutron and Muon Source. Information about the ISIS Neutron and Muon Source can be found at https://www.isis.stfc.ac.uk.
MEASUREMENT OF STRAIN PROFILES IN THE BODY OF LARGE-SIZED CERAMIC SLABS
Abstract: The experiment wishes to measure the strain profiles across 12 mm thick reference ceramics slabs especially produced to minimize and maximize thermal stress during cooling. The strain profiles determined in different portions of the samples will be used as references to calibrate the fringes effects observed on the same samples by digital holographic speckle-pattern interferometry (DHSPI). It is expected that the neutron data will allow anchoring absolute values of strain to the relative strain observed by the density of the DHSPI interference fringes. If the calibration is effective, it is expected that DHSPI may be proposed as a routine test to detect accumulated strains in ceramic bodies in field/operating conditions.
Principal Investigator: Professor Gilberto Artioli
Experimenter: Dr Maria Chiara Dalconi
Local Contact: Dr Joe Kelleher
Experimenter: Mr Cesare Tonellato
Experimenter: Dr stefano zeggio
DOI: 10.5286/ISIS.E.RB1910197
ISIS Experiment Number: RB1910197
| Part DOI | Instrument | Public release date | Download Link |
|---|---|---|---|
| 10.5286/ISIS.E.RB1910197-1 | ENGINX | 19 June 2022 | Download |
Publisher: STFC ISIS Neutron and Muon Source
Data format: RAW/Nexus
Select the data format above to find
out more about it.
Data Citation
The recommended format for citing this dataset in a research
publication is as:
[author], [date], [title], [publisher],
[doi]
For Example:
Professor Gilberto Artioli et al; (2019): MEASUREMENT OF STRAIN PROFILES IN THE BODY OF LARGE-SIZED CERAMIC SLABS, STFC ISIS Neutron and Muon Source, https://doi.org/10.5286/ISIS.E.RB1910197
Data is released under the CC-BY-4.0 license.
