ISIS Neutron and Muon Source Data Journal
This is a page describing data taken during an experiment at the ISIS Neutron and Muon Source. Information about the ISIS Neutron and Muon Source can be found at https://www.isis.stfc.ac.uk.
Stress-assisted Martensite – Influence of martensite initiation mode on variant selection and subsequent work hardening rate
Abstract: The aim of the present proposal is to determine the influence of the different martensite transformation regimes (either stress-assisted or strain-induced) on the proceeding work hardening rate in austenitic stainless steels. Also, the effect martensite transformation have austenite matrix and further martensite transformation will be monitored. Ultimately, the results will be used towards identifying the most favourable austenite orientations to promote martensitic transformation inducing the maximum level of work hardening.
Local Contact: Dr Joe Kelleher
Experimenter: Dr Richard Moat
Experimenter: Dr Yadunandan Das
Experimenter: Dr Shanmukha Rao Moturu
Experimenter: Mr ANAS ACHOURI
DOI: 10.5286/ISIS.E.RB1510396
ISIS Experiment Number: RB1510396
| Part DOI | Instrument | Public release date | Download Link |
|---|---|---|---|
| 10.5286/ISIS.E.65516439 | ENGINX | 02 October 2018 | Download |
Publisher: STFC ISIS Neutron and Muon Source
Data format: RAW/Nexus
Select the data format above to find
out more about it.
Data Citation
The recommended format for citing this dataset in a research
publication is as:
[author], [date], [title], [publisher],
[doi]
For Example:
Dr Joe Kelleher et al; (2015): Stress-assisted Martensite – Influence of martensite initiation mode on variant selection and subsequent work hardening rate , STFC ISIS Neutron and Muon Source, https://doi.org/10.5286/ISIS.E.RB1510396
Data is released under the CC-BY-4.0 license.
