ISIS Neutron and Muon Source Data Journal

Development of Residual Stress during Flow Forming of Stainless Steel Type 15-5PH

Abstract: Flow forming is a cold forming process used for the production of dimensionally accurate near net shaped hollow components used in various fields of industry. Due to the nature of the process, generation of residual stresses are inevitable. The objective of this study is to investigate the generation and distribution of residual stresses in flow formed components, to understand the evolution of stresses during the process. During flow forming process several catastrophic failures have been observed to occur that are believed to be related to the progress of residual stresses. The aim of this study is to monitor the progress of residual stress in components after different levels of deformation by flow forming. Due to the nature of martensitic steel, the microstructure might undergo strain induced phase transformation under high plastic deformation, which will be explored in this study.

Principal Investigator: Dr Saber Khayatzadeh
Local Contact: Dr Joe Kelleher
Local Contact: Dr Saurabh Kabra
Experimenter: Dr Shanmukha Rao Moturu
Experimenter: Dr Salah Rahimi

DOI: 10.5286/ISIS.E.RB1620202

ISIS Experiment Number: RB1620202

Publisher: STFC ISIS Neutron and Muon Source

Data format: RAW/Nexus
Select the data format above to find out more about it.

Data Citation

The recommended format for citing this dataset in a research publication is as:
[author], [date], [title], [publisher], [doi]

For Example:
Dr Saber Khayatzadeh et al; (2016): Development of Residual Stress during Flow Forming of Stainless Steel Type 15-5PH, STFC ISIS Neutron and Muon Source, https://doi.org/10.5286/ISIS.E.RB1620202

Data is released under the CC-BY-4.0 license.