ISIS Neutron and Muon Source Data Journal
This is a page describing data taken during an experiment at the ISIS Neutron and Muon Source. Information about the ISIS Neutron and Muon Source can be found at https://www.isis.stfc.ac.uk.
Analysis of triaxial residual stress distributions after local repair by means of cold gas repair spraying
Abstract: Residual stress maps will be determined by means of TOF neutron stress analysis at ENGIN-X for samples of the alloy 718 (INCONEL) that were repaired by cold gas spraying (CGS). Two CGS strategies were chosen to fill local repair cavities (1) conventional spraying (no masking of the spay jet) and (2) masking of the spray jet to reduce the excess material. As sprayed conditions will be compared to samples that were finished by machining away the excess material. Changes to the resulting residual stress distributions will be discussed by this systematic study to understand the influence of the excess material.
Public release date: 10 August 2027
Principal Investigator: Dr Jens Gibmeier
Experimenter: Mr Florian Lang
Local Contact: Dr Joe Kelleher
DOI: 10.5286/ISIS.E.RB2410711-1
Parent DOI: 10.5286/ISIS.E.RB2410711
ISIS Experiment Number: RB2410711
Part Number: 1
This dataset is NOT yet publicly available.
The release date is: 10 August 2027
download
the dataset
Date of Experiment: 05 August 2024
Publisher: STFC ISIS Neutron and Muon Source
Data format: RAW/Nexus
Select the data format above to find
out more about it.
Data Citation
The recommended format for citing this dataset in a research
publication is as:
[author], [date], [title], [publisher],
[doi]
For Example:
Dr Jens Gibmeier et al; (2024): Analysis of triaxial residual stress distributions after local repair by means of cold gas repair spraying, STFC ISIS Neutron and Muon Source, https://doi.org/10.5286/ISIS.E.RB2410711-1
Data is released under the CC-BY-4.0 license.
